Motor Drivers– SunRobotics

TB6600 Stepper Motor Driver Controller 8~50V 4.5A

Rs. 585.00 Rs. 1,330.00

TB6600 Stepper Motor Driver Controller 8~50V 4.5A

Rs. 585.00 Rs. 1,330.00

Supply Voltage: 8V – 50V DC (36V recommended).
Output Current: 0.3A – 4.5A (5A peak).
Micro Step: 1, 2, 8, 16.
Maximum PWM Frequency: 200kHz.
Operating Temperature: -10 to +45 °C.
Automatic Half Current: Reduces power usage.
Optical Coupling: High-speed 6N137 for improved precision.
Short-Circuit Protection: Ensures durability.
Download: Datasheet

SKU: 4650

Type: CNC Controllers & Accessories

Vendor: Generic

Quick view Add compare Delete compare

ULN2003A Stepper Motor Driver Board - Easy Stepper Driver Module

Rs. 39.00 Rs. 80.00

ULN2003A Stepper Motor Driver Board - Easy Stepper Driver Module

Rs. 39.00 Rs. 80.00

ULN2003A Motor Driver Chip Utilizes ULN2003 Darlington Arrays.
Voltage Supply 5-12V compatible power source.
Signal Indicators 4-way signal indicator LEDs.
Ease of Connection Direct connection via XH-5P socket.
Step Angle 5.625 x 1 / 64 with reduction ratio 1 / 64.
Phase Count 4-phase for precise control.
Current/Phase Optimized for 5V current per phase.

SKU: 4646

Type: Motor Controllers

Vendor: Generic

Quick view Add compare Delete compare

L298N Motor Driver - 2A Robust DC Motor Driver for Robotics

Rs. 92.00 Rs. 117.00

Out of stock

L298N Motor Driver - 2A Robust DC Motor Driver for Robotics

Rs. 92.00 Rs. 117.00

Current Sense Each motor can be monitored.
Heatsink Enhanced thermal performance.
Power-On LED Indicator for operational status.
Double H-Bridge L298N Chip for robust control.
Operational Voltage Range of 5V to 35V.
Protection Over-current and thermal safeguards.
Control Channels Two channels for diverse control.
Direction & Speed Controls for two or more motors.
Download Download Datasheet

SKU: 43821

Type: Motor Drives and Speed Controllers

Vendor: Generic

Out of stock

Quick view Add compare Delete compare

A4988 Stepper Motor Driver - Easy Stepper Driver

Rs. 99.00 Rs. 124.00

Out of stock

A4988 Stepper Motor Driver - Easy Stepper Driver

Rs. 99.00 Rs. 124.00

Voltage: 8-35 VDC operation
Current: 1.0A without heatsink, 2.0A with heatsink
Logic Input: 3 – 5.5V compatibility
Single Package: 5mm x 5mm with thermal dissipation
Microstepping: Options include full to 1/16-step
Protection: UVLO, thermal shutdown, crossover
Downloads: Datasheet

SKU: 6722

Type: Stepper Motor Drivers

Vendor: Generic

Out of stock

Quick view Add compare Delete compare

TB6600 Stepper Motor Driver Controller | 9-42V / 4A CNC 1 Axis 16 Micro-Step

Rs. 299.00 Rs. 384.00

Out of stock

TB6600 Stepper Motor Driver Controller | 9-42V / 4A CNC 1 Axis 16 Micro-Step

Rs. 299.00 Rs. 384.00

Input Current: 0~5A
Output Current: 0.5~4.0A
Control Signal: 3.3~24V
Power (MAX): 160W
Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32
Temperature: -10～45℃
Constant Current Drive: H bridge bipolar
Optocoupler Isolation: High-speed
Anti-Interference: Enhanced
Subdividable Modes: 7 types
Download: Datasheet

SKU: 43211

Type: Motor Drivers

Vendor: Generic

Out of stock

Quick view Add compare Delete compare

DM556 Digital Stepper Motor Driver - Best for CNC & 3D Printers

Rs. 1,056.00 Rs. 1,189.00

Out of stock

DM556 Digital Stepper Motor Driver - Best for CNC & 3D Printers

Rs. 1,056.00 Rs. 1,189.00

Maximum Current: 7.2A
Resolution: 0.1A
Impulse Frequency: 200KHz
Input Voltage: 20-50 VDC
Power Supply: >200W
Auto-tuning: Parameters auto-setup
Signal Input: Optically isolated
Noise Reduction: Minimal operation noise
Protection: Overvoltage, overcurrent
Download: Datasheet

SKU: 1150743

Type: Stepper Motor Drivers

Vendor: Generic

Out of stock

Quick view Add compare Delete compare

TB6600 Stepper Motor Driver - 5A Single Axes Two Phase Hybrid Stepper Motor Driver for CNC

Rs. 805.00 Rs. 1,004.00

Out of stock

TB6600 Stepper Motor Driver - 5A Single Axes Two Phase Hybrid Stepper Motor Driver for CNC

Rs. 805.00 Rs. 1,004.00

Input Current: 1~5A.
Supply Voltage: 12 to 48VDC.
Output Current: 0.2~5.0A.
Power (MAX): 160W.
Temperature: -10～45℃ H bridge bipolar.
Isolation: Optocoupler isolation increases interference protection.
Compatibility: Works with Arduino and other microcontrollers.
Current Control: 8 levels of control via DIP switch.
Motor Drive: Supports 42 and 57-type hybrid motors.
Download: Datasheet

SKU: 835839

Type: Stepper Motor Controller

Vendor: Generic

Out of stock

Quick view Add compare Delete compare

A3967 Stepper Motor Driver for Arduino | Easy Driver

Rs. 230.00 Rs. 291.00

A3967 Stepper Motor Driver for Arduino | Easy Driver

Rs. 230.00 Rs. 291.00

Power Supply: 7V to 30V.
Current Control: Adjustable 150mA/phase to 750mA/phase.
Logic Voltage: 5V or 3.3V.
Microstepping Driver: A3967 included for enhanced precision.
Microstep Resolution: Full, half, quarter, eighth adjustable via MS1, MS2 pins.
Compatibility: Suitable for 4, 6, and 8 wire stepper motors.
Firmware Support: Works with multiple microcontroller platforms.
Onboard Voltage Regulator: Ensures stable power distribution.
Built by Experts: Co-designed with Brian Schmalz.

SKU: 43823

Type: Stepper Motor Drivers

Vendor: Generic

Quick view Add compare Delete compare

DRV8833 2 Channel DC Motor Driver - Motor Driver IC for Small Motors

Rs. 65.00 Rs. 93.00

DRV8833 2 Channel DC Motor Driver - Motor Driver IC for Small Motors

Rs. 65.00 Rs. 93.00

Dual H-bridge motor driver for versatile DC motor control.
Operating voltage: 2.7 V to 10.8 V supports low voltage operations.
Output current: 1.2 A continuous, 2 A peak per motor for efficient power distribution.
3V- and 5V-compatible inputs: Easy integration with microcontrollers.
Motor outputs paralleled: Capable of delivering increased current for single motor applications.
Protection features: Includes under-voltage lockout, over-current, and over-temperature safeguards.
Reverse battery protection: FET safeguards against incorrect power polarity.
Optional current limiting: Integrate sense resistors for added control.
Compact design: Ideal for space-constrained applications.

SKU: 699498

Type: Stepper Motor Controller

Vendor: Generic

Quick view Add compare Delete compare

DRV8825 Stepper Motor Driver with Aluminum Heat Sink

Rs. 85.00 Rs. 120.00

DRV8825 Stepper Motor Driver with Aluminum Heat Sink

Rs. 85.00 Rs. 120.00

Supply Voltage: 8.2 – 42 VDC
Current Capacity: 2.2A max (24V)
Continuous Current: 1.5 A per phase
Minimum Logic Voltage: 2.5V
Microstep Resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32
Dimensions: 15 x 20 mm
Weight: 4 gm
Built-in Regulator: Interfaces with 3.3 V and 5 V systems
Over-temperature Thermal Shutdown
Overcurrent and Undervoltage Protection

SKU: 67211

Type: Stepper Motor Drivers

Vendor: Generic

Quick view Add compare Delete compare

TA6586 Based Motor Driver Module - 5A Two DC Motor Driver

Rs. 204.00 Rs. 273.00

TA6586 Based Motor Driver Module - 5A Two DC Motor Driver

Rs. 204.00 Rs. 273.00

Operating Voltage: 3 - 14VDC
Operating Current: 5A (max)
Compatibility: Arduino and Raspberry Pi
Screw Terminal: Heavy-duty for supply
Direct Connection: 433MHz receiver
Control: Two DC motors

SKU: 766347

Type: Motor Driver

Vendor: Generic

Quick view Add compare Delete compare

MX1508 PWM Dual H Bridge Stepper & DC Motor Driver 2.5A

Rs. 36.00 Rs. 43.00

MX1508 PWM Dual H Bridge Stepper & DC Motor Driver 2.5A

Rs. 36.00 Rs. 43.00

Module Supply Voltage: 2V-10V
Signal Input Voltage: 1.8V-7V
Single Operating Current: 1.5A
Peak Current: Up to 2.5A
Thermal Protection: With Auto Restore
Low Standby Current: Less Than 0.1uA
Mounting Hole Diameter: 2 mm
Ultra-small Size: Easy Integration

SKU: 699500

Type: Motor Drives and Speed Controllers

Vendor: Generic

Quick view Add compare Delete compare

L298N Motor Driver for Arduino & Stepper Motors - Dual H Bridge

Rs. 189.00 Rs. 264.00

L298N Motor Driver for Arduino & Stepper Motors - Dual H Bridge

Rs. 189.00 Rs. 264.00

Driver Chip: L298N Dual H Bridge
Voltage Range: 5V-35V
Peak Current: 2A per bridge
Output Power: Maximum 20W
LED Indicators: 4 LEDs for logic state
Independent Control: Direction, speed, braking for each motor
Screw Terminals: Easy motor and power connections
Heat Sink: Heavy-duty for performance
Current Sensing: Supports current sensing control

SKU: 51971

Type: Motor Drives and Speed Controllers

Vendor: Generic

Quick view Add compare Delete compare

DC Motor Speed Controller with PWM Adjustment - 1.8V to 12V

Rs. 66.00 Rs. 99.00

DC Motor Speed Controller with PWM Adjustment - 1.8V to 12V

Rs. 66.00 Rs. 99.00

Input Voltage Range: 1.8V-15V DC.
Maximum Output Power: 30W
Output Current: 2A(Max)
Resettable Fuse: Safety feature
LED Indicator: Operational status
PWM Control: Potentiometer adjustment
Switch Function: Integrated into potentiometer

SKU: 12267

Type: Motor Drives and Speed Controllers

Vendor: Generic

Quick view Add compare Delete compare

MX1919 Based Motor Driver Module - 2.5A for Robotics

Rs. 119.00 Rs. 149.00

MX1919 Based Motor Driver Module - 2.5A for Robotics

Rs. 119.00 Rs. 149.00

Operating Voltage: 2 – 10VDC
Operating Current: 2.5A (max)
Compatibility: Works with Arduino and Raspberry Pi
Motor Control: Supports up to 2 DC motors
Connections: Easy 2 Pin connectors
Construction: High-quality build
Application: Perfect for robotics and mechatronics projects
Usage: Directional and speed control
Product Variants: MX1919 and MX1515 IC chip options

SKU: 1778572

Type: Motor Drives and Speed Controllers

Vendor: Generic

Quick view Add compare Delete compare

PWM Generator Module for Stepper Motor Driver with Forward and Reverse Function

Rs. 782.00 Rs. 969.00

PWM Generator Module for Stepper Motor Driver with Forward and Reverse Function

Rs. 782.00 Rs. 969.00

PWM Signal Generation Board generates reliable PWM signals for precise motor control.
Forward and Reverse Control Onboard buttons easily control motor direction.
Adjustable Speed Control speed using the potentiometer for desired motor operation.
Selectable Frequency Range Choose from multiple frequency settings for varied applications.
12VDC Operating Voltage Suitable for a wide range of electronic devices.
Backward Compatible Works with legacy systems.

SKU: 815871

Type: Motor Control Unit

Vendor: Generic

Quick view Add compare Delete compare

L298P Motor Driver Shield for Arduino - L298 Motor Driver

Rs. 381.00 Rs. 566.00

L298P Motor Driver Shield for Arduino - L298 Motor Driver

Rs. 381.00 Rs. 566.00

L298P based Shield for Arduino motor control applications.
Onboard Buzzer (D4) for alert tones.
Bluetooth Interface with direct plug-in option, reducing wiring hassles.
Six Analog Interfaces for versatile connections.
Forward/Backward Steering Indicators for precise motor direction control.
L298P Chip for robust motor drive performance.
Servo Header connected to pin D9 for easy expansion.
Comprehensive Motor Control with digital I/O capabilities.
Simplified Integration with Arduino for hassle-free setup.

SKU: 815843

Type: DC Motor Driver

Vendor: Generic

Quick view Add compare Delete compare

Monster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A)

Rs. 1,599.00 Rs. 2,193.00

Out of stock

Monster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A)

Rs. 1,599.00 Rs. 2,193.00

Voltage Max: 16V Maximum
Current Rating: 30 A Practical
Continuous Current: 14 A
Current Sensing: Available to Arduino
MOSFET On-Resistance: 34 mΩ
Max PWM Frequency: 10 kHz
Thermal Shutdown: Protection
Under/Overvoltage: Shutdown

SKU: 28546

Type: Motor Driver

Vendor: Generic

Out of stock

Quick view Add compare Delete compare

Motor Drivers

Filter by

18 products

Sort by:

TB6600 Stepper Motor Driver Controller 8~50V 4.5A

TB6600 Stepper Motor Driver Controller 8~50V 4.5A

ULN2003A Stepper Motor Driver Board - Easy Stepper Driver Module

ULN2003A Stepper Motor Driver Board - Easy Stepper Driver Module

L298N Motor Driver - 2A Robust DC Motor Driver for Robotics

L298N Motor Driver - 2A Robust DC Motor Driver for Robotics

A4988 Stepper Motor Driver - Easy Stepper Driver

A4988 Stepper Motor Driver - Easy Stepper Driver

TB6600 Stepper Motor Driver Controller | 9-42V / 4A CNC 1 Axis 16 Micro-Step

TB6600 Stepper Motor Driver Controller | 9-42V / 4A CNC 1 Axis 16 Micro-Step

DM556 Digital Stepper Motor Driver - Best for CNC & 3D Printers

DM556 Digital Stepper Motor Driver - Best for CNC & 3D Printers

TB6600 Stepper Motor Driver - 5A Single Axes Two Phase Hybrid Stepper Motor Driver for CNC

TB6600 Stepper Motor Driver - 5A Single Axes Two Phase Hybrid Stepper Motor Driver for CNC

A3967 Stepper Motor Driver for Arduino | Easy Driver

A3967 Stepper Motor Driver for Arduino | Easy Driver

DRV8833 2 Channel DC Motor Driver - Motor Driver IC for Small Motors

DRV8833 2 Channel DC Motor Driver - Motor Driver IC for Small Motors

DRV8825 Stepper Motor Driver with Aluminum Heat Sink

DRV8825 Stepper Motor Driver with Aluminum Heat Sink

TA6586 Based Motor Driver Module - 5A Two DC Motor Driver

TA6586 Based Motor Driver Module - 5A Two DC Motor Driver

MX1508 PWM Dual H Bridge Stepper & DC Motor Driver 2.5A

MX1508 PWM Dual H Bridge Stepper & DC Motor Driver 2.5A

L298N Motor Driver for Arduino & Stepper Motors - Dual H Bridge

L298N Motor Driver for Arduino & Stepper Motors - Dual H Bridge

DC Motor Speed Controller with PWM Adjustment - 1.8V to 12V

DC Motor Speed Controller with PWM Adjustment - 1.8V to 12V

MX1919 Based Motor Driver Module - 2.5A for Robotics

MX1919 Based Motor Driver Module - 2.5A for Robotics

PWM Generator Module for Stepper Motor Driver with Forward and Reverse Function

PWM Generator Module for Stepper Motor Driver with Forward and Reverse Function

L298P Motor Driver Shield for Arduino - L298 Motor Driver

L298P Motor Driver Shield for Arduino - L298 Motor Driver

Monster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A)

Monster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A)

Motor Drivers

Filter and sort

Filter

18 products

Sort by:

My Wishlist

Compare